BUSHWACKER BIG EYE D3 - Page 11

8
PIR Sleep
Off/3s/5s/10s/15s
/30s/1 minute/
2 minutes/
5 minutes/
10 minutes/
20 minutes/
30 minutes/1
hour
Select the PIR sleep time, the PIR will
be disabled after each triggering. After
this period of time the PIR of the
device will wait to be triggered by the
motion of human (or animals).
Interval
Off/5s/10s/15s/
30s/1 minute/
2 minutes/
5 minutes/
10 minutes/
20 minutes/
30 minutes/
1 hour/2 hours/
6 hours/
12 hours/
18 hours/
24 hours
The camera will automatically take
photos/videos at the set interval.
Note: In this mode, the PIR sensor is
disabled.*Refer to Appendix Ⅰ
Stamps
Off/On
Select On if you want the LOGO,
temperature, moon phase, date and
time imprinted on every photo.
Power
Saving
Off/On
Select On, there will be only 20pcs
LEDs available.
PIR setting activates "Low" sensitivity
only.
Auto Power
Off
1 minute/
3 minutes/
5 minutes/
10 minutes
Auto power off at fixed time if no
keypad controlling.
Record
Sound
Off/On
Select On if you want to record sound
in video.
PIR Level
Low/Normal/Hi
gh
User can set PIR sensitivity according
to requirements.
System
Format
SD card
Format SD card.
Set Clock
2015/01/01
00:00
Set camera system time and date.