5
Note：User has to purchase battery extra.
1.4.3 Set Clock
Find “Set Clock” in the menu of “System” to set local time.
Time and Date setting will restore factory defaults when power outage.
1.4.4 Return Factory Default Setting
Find “Default Set “in the menu of “System” to confirm the camera takes
photos/videos according to default setting.
Note: Users can set parameters according to shooting requirements.
1.4.5 Start Shooting
Move power switch to “ON” position, start shooting by putting the
camera on observation place.
Note: In “ON” mode, TFT screen shut down automatically to save
power, keypad is not working.
1.4.6 Replay
On “TEST” mode, press “Replay” to review image on TFT screen.
1.4.7 Delete
Unnecessary images can be deleted when playback. Press “Replay”
button to view images, When screen show the image that you want to
delete, first press “Menu” button and choose “Delete”, then press “OK”
button and choose “Delete Current, choose “OK” and confirm delete the
current image by pressing “OK” button. All images in SD card can be
deleted by using this function.
1.5 Attentions
1.5.1 Battery
To supply power, it is recommended to use new high-performance
alkaline AA batteries, make sure the polarity matches the sign on the
cover. If you are not using the camera for an extended period of time,
please remove batteries from the camera to avoid possible acid leak that
may damage the camera.
Alternatively the camera can run on external (6V/2A) DC power supply,
solar power supply etc.
To Next Page
Loading...