BUTURE Beta03 - Jump Start Your Car; Force Start Function

JUMP START YOUR CAR
© Insert the jumper cable into the jump starter (220% power).
@ Connect the clamps to car battery (red to-+, black to -)
© start your car engine.
+ ABOUT THE FORCE START FUNCTION
If three attempts fail when you correctly connected the clamps to your
car, you can use the Force Start Function to enter boost mode.
G
© Check the clamps connection and the product’s battery is above 20%.
3 steps to fix the problem:
@ Press the Force Start Button for 3 seconds.
© The indicator will be green, and go back to start engine ignition.
Caution: When using this function, auto-detection and safety features will
be disabled temporarily.