11 EN
sales@ibuture.com
7.1 Clean the Motor
7.2 Clean the Dust Cup and Filter
7. MAINTENANCE
Wipe the motor with a soft dry cloth.
*It is recommended to clean once a week and replace it once every 2 months.
1. When the dust reaches the "MAX" mark
of the dust cup, please clean it up as soon
as possible, or it will affect the vacuuming
effect.
3. Pull back the button to remove the dust
cup.
5. Scrape the HEPA filter with a cleaning
brush.
7. Clean the dust cup, sponge and stainless
steel lter with water.
6. Rotate the metal filter clockwise to
remove it from the lter holder.
8. Leave it to completely dry before
installing to the vacuum.
4. Grab the HEPA filter handle to remove
the HEPA lter, sponge and stainless steel
lters.
2. Press the dust cup cover release button
to open the cover and dump the garbage
into the trash can.
1min
1min
MAX
To Next Page
Loading...
