BUTURE VC10 - Page 12

If you have any questions. email to tech-support@ibuture.com
« Over-temperature protection
Battery temperature will rise under continuous high suction power mode. If you charge the battery
when its temperature is to high, the over-temperature protection will work. On the screen the
over-temperature protection indicator will light up, and the battery will intelligently reduce the
charging input power to prevent overheating. Wait 20-45mins for the battery to return to normal
temperature, the temperature protection indicator will go out and the battery will return to
normal charging power.
- Overcurrent & Overvoltage protection
While charging, if the input voltage or current is too high, the Overcurrent & Overvoltage protection
will work. The three indicators on battery pack will flash at the same time and the battery will
temporarily stop charging. After the input voltage and current return to normal, the battery indicator
and charging progress will intelligently return to normal.