tech-support@ibuture.com
EN
14.
•
Clean dust cup and filters with water. Make sure that the dust cup and filters have dried before use.
•
Install the multi-cone filter and HEPA filter clockwise, aligning the clips to install the cyclone filter. Then Install the sponge filter and dust cup.
•
Push the button to the “unclock” sign, remove the brush roller.
Tip: After long periods of use, the bristle may be jammed by hair or similar build-up. It’s recommended to clean the brush roller periodically to ensure
efficient operation and maintain suction.
6.4 Brush Roller Cleaning
To Next Page
Loading...
