damage to the screen.
Programming instructions for 18.5” AXS19HD
Screen & AXS19TVC2 Screen Controller.
In order to program the screen you must follow
these steps first:
Connect the TV to an active cable line.
Power the TV by plugging in the supplied power adapter.
1) Turn on the TV by pressing the power button on the wireless
remote.
2) Press MODE on the wireless remote and you will see the
following
options:
TV
AV
Composite
HDMI
3) Select TV by using the channel up and down buttons
and press the OK button located on your wireless remote
directly underneath the mode button.
4) Press the MENU button on your remote and scroll
across using the volume buttons on the remote until you reach
CHANNEL. (This will be on the far right side of the menu)
Press OK below the mode button.
If you are not able to select Channel from the menu, the TV is not
recognizing signal from your cable or satellite provider. Check the cable feed and
connection to the screen.
To Next Page
Loading...