Broadcastvision Entertainment
Toll Free: 888-330-4BVE(4283) www.broadcastvision.com
READ FIRST
Please
note the
following before installing your personal screen
and controller.
Do not plug the
controller
into the
screen
until the
channels
are programmed. The
TV will not
program
using the
wireless
remote if the
controller
is
connected
to the
TV.
Before connecting
the
controller
to the
screen,
be sure the LCD is powered off.
When the screen is
powered
off, a RED light will
appear
at the
bottom
right hand
corner. A
GREEN
light means that the
screen
is
currently
on. Once the
controller
is
connected, always turn the LCD on and off using the power button on the
controller.
Controller
Factory
Default
Settings
Your
controller
will be
shipped
with the
following
default settings.
For
programming
and
de-programming
instructions,
please see pages 19-20.
Programmed
to
communicate
with TV – We have
already programmed
the
controller
to work with your TV. If for some reason it is not
communicating
with the
TV, please see pages 19-20 for
programming
instructions.
Source
button Inactive – The source button on the
controller
is
programmed
as
inactive. An active source button will allow your
members
to choose other AV
source
options,
for
example:
DVD
players,
MP3
players,
Ipod’s, etc.
Auto Off Feature – To
conserve energy
in your
facility,
the screen will automatically
turn off after 15
minutes
if no
controller buttons
are pressed and if there is no
headphone inserted
in the
headphone
jack.
To Next Page
Loading...