To Next PageTo Next Page
Need help?Do you have a question about the BWT MINISTIL 1iD and is the answer not in the manual?
General| Type | Water Softener |
|---|---|
| Technology | Ion Exchange |
| Control | Electronic |
| Water temperature | 5 - 30 °C |
| Ambient temperature | 5 - 40 °C |
| Operating pressure | 2.0 - 8.0 bar |
| Power supply | 230V/50Hz |
| Filtration Technology | Ion Exchange |
| Operating Temperature | 5 - 40 °C |
| Included Components | installation kit |
| Regeneration | Automatic, proportional salt regeneration |
Manual must be available and understood by all users.
Contact details and address of BWT AQUA AG.
Explains the technology and applications of the MINISTIL cartridges.
Describes plastic bottle cartridges with bayonet connectors.
Describes stainless steel cylinder cartridges with screwable connections.
Introduces the new control head technology.
Lists components for types 1iD, 2iD, 3iD, 5iD, 6iD.
Explains warning signal words (Danger, Warning, Caution, Notice, Info).
Describes the water flow and application of the cartridges.
Lists operating rules and notices for cartridges.
Specifies required qualifications for installation and maintenance staff.
Details installation site, feed water quality, and pressure.
Covers unauthorized changes, microbial safety, and improper operation.
Explains how the MINISTIL cartridges remove minerals from water.
Details construction of plastic, glass fibre, and stainless steel cartridges.
States conditions for raw water pressure above 6 bar.
Describes the operation when the device is vented and outlet is clear.
Describes the operation when the device is vented and connected under pressure.
Lists requirements for the installation site.
Shows connection options for types 1iD and 2iD with diagrams.
Instructions for assembling the pluggable connection angle.
Instructions for assembling the screwable connection angle.
Details connection for EOS and EOSP conductivity values.
Provides safety precautions for electrical installation.
Explains the procedure for venting the cartridge.
Explains how to set the cartridge to operating position.
Describes the color LCD display and its functions.
Details the steps for operating the control head.
Configure conductivity limit and raw water input.
Configure cartridge model, current time, and date.
Guides on identifying and resolving common device faults and error messages.
Select cartridge model, set current time and date.
Details regular technical servicing and inspection requirements.
Instructions for removing connection head and angles.
Steps to prepare cartridges for transport and packaging guidelines.
Specifies storage conditions and proper disposal of the device.
Technical specifications for P-6, P-12, P-24 cartridge types.
Technical specifications for P-16, P-22, P-42, P-62, P-102 types.
Technical specifications for P-21, P-41, P-61, P-101 types.
Technical specifications for Jumbo P devices (rent).
Compares features of different MINISTIL control head types.
Lists accessories and spare parts for MINISTIL cartridges.
Various elbows and seals for connection heads.
Hoses, transport locks, retaining plates, and solenoid valves.
Explains the process and benefits of cartridge regeneration.
