To Next PageTo Next PageWhat to do if the flushing water outlet cannot be closed in BWT Water Filtration Systems?
If the flushing water outlet cannot be closed in your BWT Water Filtration Systems, it might be because the backwash element does not reach its final position due to coarse dirt particles. Try fully opening and closing the turning knob, and repeat the backwash several times.
Why has the water pressure in my BWT Water Filtration Systems dropped considerably?
The water pressure in your BWT Water Filtration Systems might have dropped considerably because of a dirty filter element. To resolve this, carry out a backwash.
General| Filter Life | Up to 12 months |
|---|---|
| Operating Temperature | 5 - 38 °C |
| Power Supply | Not required |
| Type | Under-sink water filtration system |
| Water Storage Capacity | Not applicable (on-demand filtration) |
Provides detailed specifications including connection sizes, flow rates, pressure, temperature, and dimensions for the BWT Diago RF filter.
Provides instructions for the physical installation of the filter, connecting fittings, and waste water hose.
Guides the user through initial setup, including checking installation, opening valves, and deaerating the pipework.
Addresses common issues like reduced water pressure or flushing outlet not closing, providing causes and solutions.
