To Next PageTo Next PageWhat to do if there is no raw water input in BWT bestaqua 16 ROC Water Filtration Systems?
If there is no or insufficient raw water input in your BWT Water Filtration System, first check the water pipe parameters and the inlet water valve. Also, verify that the prefilter is not blocked. The device is designed to restart automatically after these checks.
What to do if there is insufficient raw water input in BWT bestaqua 16 ROC Water Filtration Systems?
If your BWT Water Filtration System indicates insufficient raw water input, inspect the pre-filter and hoses for any blockages or restrictions. After checking these components, you can restart the system by pressing the red icon in the app.
What to do if pump pressure is too high in BWT bestaqua 16 ROC?
If the pump pressure is too high in your BWT Water Filtration System, check the flow in the concentrate line. Additionally, you can restart the system by pressing the red icon within the app.
What to do if there is a leak inside BWT bestaqua 16 ROC Water Filtration Systems?
If you find a leak or condensation inside your BWT Water Filtration System, immediately disconnect the device from both the electricity and water supply. It is important to then inform service staff about the issue.
What to do if motor overheating protection triggered in BWT Water Filtration Systems?
If the motor overheating protection is triggered in your BWT Water Filtration System, the device will automatically restart once the motor has sufficiently cooled down.
What to do if pressure sensor is defective in BWT bestaqua 16 ROC Water Filtration Systems?
If the pressure sensor for permeate is defective in your BWT Water Filtration System, disconnect the device from the electricity and water supply immediately. Then, inform service staff about the issue.
General| Technology | Reverse osmosis |
|---|---|
| Operating water temperature | 5 - 35 °C |
| Ambient temperature | 5 - 40 °C |
| Operating water pressure | 3-6 bar |
| Power Supply | 24V DC |
| Included Filters | carbon filter |
Defines key terms and acronyms used in the manual for clarity.
Details the components and connection materials included with the BWT bestaqua 16 ROC system.
Clarifies the meaning of DANGER!, WARNING!, CAUTION!, and NOTE! symbols for user safety.
Explains the symbols found on the product label, such as pressure and temperature indicators.
Provides essential physical dimensions, connection types, and weight specifications for installation planning.
Lists critical operating parameters like pressure, temperature, and water quality limits for optimal performance.
Outlines the intended applications for the BWT bestaqua 16 ROC and defines what constitutes improper usage.
Explains the internal workings of the reverse osmosis system and its core components.
Defines the operator's duties for safe installation, operation, and manual upkeep.
Outlines the terms of the warranty and BWT's liability limitations.
Specifies that only trained and qualified personnel should perform installation and maintenance.
Details the necessary inlet and operating pressures and recommendations for pressure regulation.
Lists the essential requirements for the installation site, power, and water supply.
Instructions for safely unpacking the device and checking for any transport damage.
Step-by-step guidance for correctly connecting the water lines and ensuring leak-free operation.
Procedures for safely powering on the BWT bestaqua 16 ROC and verifying its operational status.
How to adjust the blending valve to achieve the desired water quality using the bypass feature.
Explains hygiene concepts like stop delay and interval flushing for membrane maintenance.
Detailed steps for safely removing and installing a new filter cartridge, including noting dates.
Guide to installing and connecting the BWT RO mobile application for device monitoring.
Interprets the meaning of different LED colors and flashing patterns for status indication and alarms.
Troubleshooting guide for common errors, detailing flashing LEDs, causes, and remedies for device malfunctions.
Information on replacing wearing parts, maintenance intervals, and responsibilities.
Instructions for cleaning the device surfaces safely and effectively.
Relevant safety standards and precautions for device operation and handling.
Guidelines for environmentally responsible disposal of the device and its components.
