Need help?Do you have a question about the BWT bestaqua 14 and is the answer not in the manual?
General| Brand | BWT |
|---|---|
| Model | bestaqua 14 |
| Category | Water Filtration Systems |
| Language | English |
Device is for desalination of drinking water up to 30°C and 6 bar.
Observe country guidelines and disconnect power before maintenance.
Do not operate with covers removed, use correct power supply.
Operation, setup, maintenance by skilled/trained personnel.
Location, power, water supply, hygiene, frost protection.
Must be cold drinking water, max 30°C, subject to limits.
Inlet pressure must be between 2.0 and 6.0 bar.
General instructions for water installations and hygiene.
Flexible installation, tight connections, free flow for concentrate.
Connecting power, pre-filter, opening valve, initial flush.
Describes display elements like flow rates, pressure, conductivity, status, and main menu icons.
Details function keys (ON/OFF, Up, Down, OK, Return) and LED status indicators.
Lists FAULT 1 (Bus communication error) and FAULT 2 (Pump fuse).
Covers pump pressure transmitter failure and max pressure transmitter failure.
Covers pump pressure too high and temperature sensor failure.
Covers water leakage and conductivity too high.
Lists problems like no water, low permeate, hard water, incorrect time.
To Next Page