EasyManua.ls Logo

BWT DWFKIT User Manual

BWT DWFKIT
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Drinking Water Filter Kit
Installation and Operating Instructions
Model: DWFKIT
Specifi cations:
Pressure Range: 30 – 72 psi (2.1 – 5.0 bar)
Temperature Range: 40 – 77°F (5 – 25°C)
Rated Service Flow: 2.0 Lpm
Filter Capacity: 2000 Litres or 6 months (Max)
Parts Included:
• DWFCART fi lter cartridge C/W integral
push-fi ts connections
• Mounting bracket C/W Screws
• Self cutting tap with tube attached
• Drinking water tap
• 6.35 mm (1/4”) plastic tubing
• For cold water use only.
• Make certain that installation complies with all local
bylaws and regulations.
• The contaminants or other substances removed or
reduced by the selected cartridge are not
necessarily in your water. Ask your local water
supplier for a copy of their water analysis.
• After prolonged periods of non-use (such as during
a holiday) it is recommended that the system be
ushed thoroughly. Let water run for 2-3 minutes
before using.
• The fi lter cartridge used with this system has a
limited service life. Changes in taste, odour colour;
and/or fl ow of the water being fi ltered indicate that
the cartridge should be replaced.
Tools required:
• Phillips Screwdriver
• Towel
• Drill
• Tape Measure
Optional Materials:
• 6.3 & 12.7 mm (1/4” & 1/2”) Drill Bit
• Cone-shaped grinding wheel
• File or Sandpaper
• Pencil
• 3.2 mm (1/8”) Drill Bit
Installations:
• For standard installation on 15 mm copper, steel, brass or PVC
cold water pipe.
• Please read all instructions and precautions before installing and
using your under-sink drinking water system.
• Numbered diagrams correspond with numbered steps.
Precautions:
WARNING: Do not use with water that is microbiologically unsafe or
of unknown quality without adequate disinfection before
or after the system. Systems certifi ed for cyst reduction
may be used on disinfected waters that may contain
lterable cysts.
CAUTION: This fi lter must be protected from freezing, which can cause
cracking of the fi lter and water leakage.
CAUTION: Because of the product’s limited service life and to prevent
costly repairs or possible water damage, we strongly
recommend that the head of the fi lter be replaced every
ten years. If the head of your fi lter has been in use for
longer than this period, it should be replaced immediately
Date the top of any new head to indicate the next
recommended replacement date.
CAUTION: Turn off water supply to head without cartridge if it must be left
unattended for an extended period of time.
Customer Help Line: 01376334200
Monday to Friday 08.30 - 17.00
1
Question and Answer IconNeed help?

Do you have a question about the BWT DWFKIT and is the answer not in the manual?

BWT DWFKIT Specifications

General IconGeneral
BrandBWT
ModelDWFKIT
CategoryWater Filtration Systems
LanguageEnglish

Summary

Product Specifications

Parts and Tools

Parts Included

Lists components provided with the DWFKIT, including the cartridge and fittings.

Tools Required

Details necessary tools for installation, such as screwdrivers and drills.

Optional Materials

Lists additional materials that may be useful during installation.

Safety Precautions

Installation Guide

Selecting Tap Location

Guidance on choosing an appropriate location for the drinking water tap.

Preparing to Fit Tap

Instructions for preparing the sink or worktop for tap installation.

Installing Quarter Turn Tap

Steps for correctly fitting the quarter turn tap assembly.

Installing Saddle Valve

Procedure for connecting the filter to the main water supply pipe.

Mounting Filter System

Instructions for attaching the filter cartridge bracket.

Final Assembly and Maintenance

Final Assembly

Connecting tubes to the cartridge and flushing the system.

Filter Cartridge Replacement

Guidance on when and how to replace the filter cartridge.

Troubleshooting Guide

Related product manuals