Need help?Do you have a question about the BWT PERMAQ COMPACT 51 and is the answer not in the manual?
General| Technology | Ion Exchange |
|---|---|
| Product Type | Compact Water Softener |
| Model | PERMAQ COMPACT 51 |
| Brand | BWT |
| Power Consumption | 0 W |
| Filter Media | Ion exchange resin |
| Function | Water softening |
| Type | Water Softener |
| Application | Domestic water softening |
Defines technical terms used in the manual.
Specifies the required raw water quality parameters for optimal operation.
Outlines how to connect inlet, outlet, permeate, and overflow hoses.
Instructions for connecting the raw water inlet supply.
Guidance on connecting the treated water outlet.
Steps for connecting the concentrate outlet hose.
How to connect the safety overflow hose.
Step-by-step guide for initial plant setup and operation.
Procedures for setting the correct water outlet flow rate.
Guide to adjusting the recirculation flow rate.
Details the procedure for starting the transport pump.
Instructions on how to use the manual by-pass valve.
Outlines regular checks and maintenance intervals for the plant.
Provides solutions for common operational problems.
Diagnoses and resolves issues related to reduced plant output.
Addresses problems with poor treated water quality.
Explains how to handle low raw water pressure alarms.
Guides on troubleshooting transport pump alarms.
Describes actions for low water level indications.
Explains how to resolve high water level alarms.
Provides steps to troubleshoot a non-operating plant.
Addresses issues with the transport pump cycling on and off.
Troubleshoots issues related to hard water detection.
Provides a guide to understanding LED indicators and alarm states.
Details how to configure plant settings using DIP switches.
Provides detailed technical data and components of the plant.
Presents key performance and physical data of the plant.
Instructions for cleaning and replacing the RO membranes.
Step-by-step guide for cleaning the RO membranes.
Detailed instructions for replacing the RO membrane.
Provides the Piping and Instrumentation diagram for the plant.
Includes arrangement and layout diagrams of the plant.
Shows the electrical wiring diagrams for the unit.
A checklist for the initial start-up procedure.
A logbook for recording plant maintenance and operational data.
Lists all available spare parts with their numbers.
Illustrates the location of spare parts within the plant.
Official document confirming compliance with EC directives.
To Next Page