BWT MINISTIL P-21 User Manual

EINBAU UND BEDIENUNGSANLEITUNG
NOTICE DE MONTAGE ET D’UTILISATION
INSTALLATION AND OPERATING MANUAL
DE
FR
FOR YOU AND PLANET BLUE.
BEST WATER TECHNOLOGY
Art.No.: 152437 /
BWT AQUA AG
/ MINISTIL control head 1 iD-6 iD / Rev. 3 – DE/FR/EN / 2021–10
Änderungen vorbehalten! / Sous réserve de modifications ! / Changes reserved!
BWT MINISTIL
Patronen mit Steuerungskopf 1iD-6iD
Cartouches avec tête de contrôle 1iD-6iD
Cartridges with Control head 1iD-6iD
EN

BWT MINISTIL P-21 Specifications

General

Brand	BWT
Model	MINISTIL P-21
Category	Water Filtration Systems
Language	English

Summary

Safety Information

Marking of Information

Explains the meaning of signal words used for warnings and instructions in the manual.

Intended Use

Describes the proper application and water flow through the MINISTIL cartridges.

Operating Regulations and Personnel

Operating Regulations for MINISTIL Cartridges

Outlines essential operating rules and notices for the MINISTIL cartridges.

Personnel Qualification and Training

Specifies the qualifications and training required for personnel involved in installation and maintenance.

Installation and Operation

Installation Conditions

Details national guidelines, installation site requirements, frost protection, and feed water quality.

Impermissible Operating Methods

Lists improper uses of the device that must be avoided for safety and warranty.

Hydraulic Connection

Installation Place

Specifies requirements for the location where the MINISTIL device will be installed.

Hydraulic Connection of Head Types 1iD to 6iD

Illustrates hydraulic connections for MINISTIL connection heads, types 1iD and 2iD.

Hydraulic Connection Details

Hydraulic Connection MINISTIL Connection Head Type 3iD, 5iD and 6iD

Illustrates hydraulic connections for MINISTIL connection heads type 3iD, 5iD, and 6iD.

Mounting the Connection Head on a Plastic Cartridge

Provides step-by-step instructions for mounting the connection head onto a plastic cartridge.

Connection Angle Assembly

Assembly of the Pluggable Connection Angle on a Plastic Cartridge

Assembly of the Screwable Connection Angle on a Stainless Steel Cartridge

External Measurement Systems

Installation of External Conductivity Measuring System

Electrical Connection

Venting and Commissioning

Venting Position A of the Cartridge

Operating Position B of the Cartridge

Initial Start-up and Setup

Setting Conductivity Limits

Inputting Raw Water Conductivity

Fault Elimination

Troubleshooting

Provides common faults, their reasons, and acknowledgement steps for troubleshooting.

Quick Setup Flow

Cartridge Type Selection

Time and Language Setup

Reset and Cartridge Exchange

Maintenance

Performing Maintenance Work

Details regular maintenance tasks, checks, and cleaning for the MINISTIL system.

Disassembly and Decommissioning

Disassembly the Connection Head

Disassembly the Plug-in Connection Angle

Disassembly the Screwable Connection Angle

Technical Data

BWT MINISTIL P-6, P-12, P-24

Provides technical specifications for MINISTIL cartridges P-6, P-12, and P-24.

BWT MINISTIL P-16, P-22, P-42, P-62, P-102

Provides technical specifications for MINISTIL cartridges P-16, P-22, P-42, P-62, and P-102.

BWT MINISTIL P-21, P-41, P-61, P-101

Provides technical specifications for MINISTIL cartridges P-21, P-41, P-61, and P-101.

Additional Technical Data

BWT MINISTIL P-280, P-670, P-930

Technical data for the MINISTIL Jumbo P devices for rent.

BWT MINISTIL Control Heads of the 1iD-6iD Series

Comparison of features for BWT MINISTIL control heads from type 1iD to 6iD.

Spare Parts

Accessories and Spare Parts for the Ministil P Series

Cartridge Regeneration

Regeneration of the Cartridge

Advantages of the Regeneration Service

EU Declaration of Conformity