EN
77
2
1
A) VENT
POSITION
closed
Fig. 20: Vent position
˳ :ã©Ôþó©òþòƯ¾³ŇĕÆÝ¾Ý¯³ÝöĂò³þÃþÆþÆö©Öãö³¯
(lock symbol).
˳ +Ýö³òþþóÃãö³ÆÝþãþó©ãÝöĂܳòÆÝþóãĂþňãĐãò
open the ventilation valve supplied by the customer.
˳ ZÖãĐÖĖþĂòÝãÝþóĐþ³òöĂïïÖĖݯֳþÆþňãĐþÃòãĂ¾Ã
the cartridge until no more air flows out at the end of
the hose (let the water drain through the device for
about 30 seconds).
˳ Öãö³þóĐþ³òöĂïïÖĖ˺
˳ Gï³Ýþó©òþòƯ¾³ŇĕÆÝ¾Ý¯ò³Üãď³þó©ãÝþòãÖó¯
from the cartridge.
8.2 Operating position B of the cartridge
˳ ÖÆ¾Ýþó©ãÝþòãÖó¯öãþÃþþó½òãÝþďÆ³Đã½þó
connection/hoses) points backwards (turn by 180°).
˳ SÖ©³þó©ãÝþòãÖó¯ãÝþó©òþòƯ¾³Ý¯Öã©Ôþó
cartridge fixing (lock symbol).
2
1
closed
B) OPERATING
POSITION
Fig. 21: Operating Position
The device is now in the “operating position” and ready for
operation. If you have any questions about start-up, contact
the BWT AQUA customer service team on +41 061 755 84 00.
˳ÖÆ¾Ýþó©ãÝþòãÖó¯ĐÆþÃþó©òþòƯ¾³öãþÃþþó
front points towards the hose connections.
Fig. 19: Connection at the underside of the control head