BYD e6A - Reversing Radar System

BYD e6A AUTO Owner's Manual
1-92 Other Equipment
Electronic Clock Adjustment
In gear ACC or ON:
Press H to adjust the hours displayed in the
clock. The hour number will increase by 1
within 00-23 in a circulating way every time
the button is pressed;
Press M to adjust the minutes displayed in the
clock. The minute number will increase by 1
within 00-59 in a circulating way every time
the button is pressed;
The hours can be set to the adjacent value
rapidly by pressing R. For example, 1:06 is
changed into 1:00, or 1:56 is changed into
2:00 (≤ 30,the current hours will be selected;
otherwise, the next hours will be selected)
Electronic clock and external
temperature display
Time and temperature are shown on the
combination meter
Reversing Radar System
(if equipped)
During reversing, it will remind the driver of
the approximate distance between the car
and barrier through indicator and buzzer. A
sensor is used in this system to detect the
barrier.
When power switch is at "ON" position and
selection lever stays at reverse gear, the
system is in operating conditions.