BYD e6A - Other Equipment

BYD e6A AUTO Owner's Manual
Other Equipment 1-93
ON: press the switch.
Indicator is on and buzzer sounds.
OFF: press the switch again.
This system reminds the driver of the
distance between car and barrier through
indicator and buzzer.
ADistance
illustrated by A
mm
Indicator
Buzzer
About 1000-750
Flicker
Sound
intermittently
About 750-500
Flicker
Fast sound
intermittently
About 500or less
than 500
ON
Sound
continuously
Sensing Range
Sensing range means the maximum value is
about 1000 mm to probe A.
Due to limited sensing range, you must check
around the car before driving and start driving
quite slowly.
Tips
Do not stick accessories or other things on
the sensor used for probing barriers.
Otherwise, it will interfere with the accurate
operation of the system, which may cause
unexpected accidents.
The system cannot work normally under the
following conditions.
● Things such as ice, snow and mud are
stuck on the sensor.
● Stop the car in the environment of high or
low temperature for a long time.
● Drive on the rough path, muddy road or
road with deep grass.
● Be close to the horn of other vehicles,
engine of motorcycle or any object which
may generate supersonic wave.
● Drive in the heavy rain or with water
splashed on the car.
● Be equipped with two-channel radio
antenna or buffer rod.
● Car weight is tilt.
● Cover the sensor with hands.
● Be too close to the object.
● Beat the sensor heavily.
Reversing Radar System
reversing radar power switch