BYD e6A - Sun Visors; Vanity Mirror

BYD e6A AUTO Owner's Manual
Other Equipment 1-95
a. To pull out the maintenance switch, rotate
the handle by 90 degrees to its limit
position, then pull up.
b. After the switch is pulled out, you may see
an opening on the switch housing. There is
a connector port inside the housing. Never
insert your finger or make contact with the
port.
c. To insert the switch, plug the handle in and
rotate it by 90 degrees to the limit position.
Sun Visors
Pull down the sun visors for usage. Remove
the sun visors from clips, and turn them to the
side window. Thus, they can also be used as
the side window sun visors.
Make sure the sun visors have been put back
to their original positions when entering or
leaving the vehicle.
Vanity mirror (if equipped)
Open the cover to use the vanity cosmetic
mirror in the sun visors. The lamp beside the
mirror will light on when the cover is opened.
Rotate
down
Clip
Rotate to
one side