BYD e6A AUTO Owner's Manual
Motor and Chassis 5-15
Precautions on Aluminum Wheel
● It is recommended to use aluminum
wheels depending on corresponding
specifications. For the detail information,
please refer to the next chapter.
● For a vehicle with aluminum wheels, the
nuts on the wheels must be checked after
the first 1600 km travel to make sure they
remain tight.
● After tires are rotated, repaired or
replaced, the nuts on the wheels must be
checked after the first 1600 km travel to
make sure they remain tight.
● Do not damage the wheels when using
tire chain.
● Use only wheel nuts and wrenches
designed for use with your aluminum
wheels in the in-vehicle tools.
● When adjusting wheel balance using tire
chain, please use the counter balance,
plastic mallet or rubber mallet specified by
BYD service station.
● As with all autos, aluminum wheels shall
be checked regularly, and replaced if any
damage.
To Next Page
Loading...
