BYD e6A AUTO Owner's Manual
Operation of Instruments and Controllers 1-7
Odometer and Dual Trip Odometer
This screen displays the following
information.
a. Odometer - display the total mileage of the
car.
b. Dual Trip Odometer - display the different
mileages since the two trip odometers
were reset to zero respectively.
You can use one to calculate remaining
battery power (TRIP A) and use the other to
record the mileage of each trip (TRIP B).
c. Trip odometer reset button - reset the
reading of the dual trip odometer to zero;
rotate the display.
To rotate the display of the odometer, press
and then release the switch quickly. For each
press, the meter display will rotate from
odometer to Trip A, from Trip A to Trip B, or
from Trip B to odometer.
To reset a trip odometer to zero, first switch the
information displayed on the screen to the
desired reading (Trip A/Trip B), and then press
the button until it is reset to zero.
Remaining Mileage Meter
The remaining mileage is the driving distance
that can be supported by the remaining power,
which is calculated based on the remaining
power and the vehicle operating conditions.
To Next Page
Loading...
