BYD e6A - Page 62

BYD e6A AUTO Owner's Manual
1-44 Seats, seat belts and airbags
Seat belt with the adjustable shoulder
height device
Adjust the shoulder height device to the
position suitable for the body size.
Ascending: press down the lock-release
button and slide the height device upward.
Descending: press down the lock-release
button and slide the height device downward.
After adjustment is finished, ensure the height
device is locked in the appropriate position.
Use and adjustment of two-point seat
belts
The two-point seat belt is used on the back
middle seat. Sit straight on the seat, rest on
the backrest, fasten the seat belt, and insert
the tongue into the buckle.
A clicking sound will be made after the tongue
is inserted into the buckle.
If the seat belt is not long enough, keep the
plug and seat belt at a right angle and then
pull the tongue.
Retract the excess part of seat belt, adjust the
seat belt position and try to keep it on the hips.
To shorten the seat belt, just pull the unfixed
end of seat belt.
WARNING
A seat belt which is in the high position or is
loose may cause severe injury to the
passenger in a collision or other accident,
as the lap belt may slide down to the waist.
Try to keep the lap belt below the hips.
extend
too high
Adjusted to the
appropriate position