BYD e6A - Page 75

BYD e6A AUTO Owner's Manual
Steering Wheel and Rearview Mirror 57
Adjustment of outer power
rearview mirrors
Adjust the outer rear-view mirrors with this
switch.
1. Selection switch-it is used to select the
outer rearview mirror to be adjusted. Press
the switch to "L" (left) or "R" (right).
2. Control switch-it is used to adjust the outer
rearview mirror. Press the switch according
to the required direction.
3. Folding switch-it is used to control the
folding of outer rearview mirrors.
When the key is in the position "ACC" or "ON",
the outer rearview mirrors can be adjusted.
NOTE
If the rear-view mirror is frozen, do not
manipulate the controller or scrape the
surface of the rearview mirror. Use a
spraying deicer to remove the ice on the
surface of the rearview mirror.