BYD AUTO F0 Owner’s Manual
128
1. Use cross screwdriver to remove
the screws. (As shown in the figure
above)
a. Brake light / taillight
b. Rear turn signal light
c. Rear fog light (driver side) or
backup light (passenger side)
2. Remove the rear grouped light (As
shown in the figure above)
3. Remove the light holder in the
rotation direction as shown in the
figure above.
4. Take out the bulb and replace it.
High mounted brake light
1. Use cross screwdriver to remove
the screws.
To Next Page
Loading...
