BYD F3DM - Page 107

- 107 -
F3DM Owner’s Manual
For manual operation
Rotating speed of fan – set to the
suitable rotating speed.
Temperature – point at high
temperature
Air admission – external recycling
(outside air)
Airow – oor
Air conditioner - OFF
●To increase temperature rapidly,
select Internal Recycling for several
minutes. To avoid fogging on the
window, select External Recycling after
heating up the inside of the car.
● Select Floor/Windshield airflow to
heat up the inside of the car while
defogging or defrosting the windshield.
Air Conditioner
To acquire a better effect, set the
controller to:
For automatic operation
Press automatic mode button.
Temperature – set to the suitable
temperature
Air admission – external recycling
(outside air)
For manual operation
Rotating speed of fan – set to the
suitable rotating speed
Temperature – point at low
temperature
Air admission – external recycling
(outside air)
Airow – instrument panel
Air conditioner - ON
●To lower the temperature rapidly, set
the internal-external recycling mode
selecting button to Internal Recycling
for several minutes’ circulation.
Ventilation
To acquire a better effect, set the
controller manually to:
Rotating speed of fan – set to the
suitable rotating speed
Temperature – point at low
temperature
Air a– external recycling (outside
air)
Airow – instrument panel
Air conditioner - OFF
使用手册小330.indd107 2011-4-1318:36:49