BYD F3DM - Power Exterior Rearview Mirrors

- 63 -
F3DM Owner’s Manual
Outside Rearview Mirrors
Adjust the mirror so that you can just
see the side of your vehicle in the
mirror.
Be careful when judging the size
or distance of any object seen in
the outside rear view mirror on the
passenger’s side because it is a
convex mirror. Any object seen in a
convex mirror will look smaller and
farther away than when seen in a flat
mirror.
WARNING
Do not adjust the mirror during
driving. Doing so may
cause the driver to mishandle the
vehicle and an accident may occur
resulting in death or serious injuries.
outside Rear-view Mirror Controller
Adjust the outside rear-view mirror with
this switch.
1. Selection switch – it is used to select
the outside rear-view mirror which shall
be adjusted.
Press the switch to select L (left) or R
(right).
2. Control switch – it is used to adjust
the outside rear-view mirror.
Push the switch in the desired
direction.
When ignition switch is at “ACC” or
“ON”, you can adjust the mirror.
Notice
If ice should jam the mirror, do not
operate the control or scrape the
mirror face. Use a spray de–icer to
free the mirror.
!
使用手册小330.indd63 2011-4-1318:36:45