BYD F3DM - Page 203

- 203 -
F3DM Owner’s Manual
Headlight
1. Left Headlight: remove clamp and
take away the tube of air lter.
Remove and install the cover clamp as
shown in the following illustration.
Remove Clamp
Install Clamp
2. Pull off the connector while pressing
down the buckle.
If the connector is too tight, shake it
rst.
3. Remove the bulb by turning it
counterclockwise, then pull it out.
4. Install the new bulb in reverse order.
You don’t have to adjust the headlight
after replacing the bulb. If it needed,
使用手册小330.indd203 2011-4-1318:36:57