- 205 -
F3DM Owner’s Manual
Remove the bulb and socket by turning
the socket counterclockwise, and then
pull out the bulb counterclockwise.
The steps of installation are in reverse
order.
Rear Turn Signal Light
The steps to replace the bulb of rear
turn signal light are the same with
backup light.
Rear fog light (left)
1. Remove the bulb socket from the
fog light by turning counterclockwise.
2. Pull the bulb straight out of socket.
The steps of installation are in reverse
order.
High Mount Brake Light
Push it forward and remove it.
2. Remove the bulb socket by turning
counterclockwise.
3. Remove the bulb.
The steps of installation are in reverse
order.
使用手册小330.indd205 2011-4-1318:36:57
To Next Page
Loading...
