BYD F3DM - Page 32

- 32 -
F3DM Owner’s Manual
1.Open the remote control with a
slotted screwdriver or a similar tool.
2.Remove the depleted battery of the
remote control.
3. Install a new battery with positive (+)
side up. Please get the lid on for the
remote control.
After replacing the battery, please
check whether the remote control
can work normally. If it can not
work normally, please contact BYD
authorized service station for repair.
WARNING
To avoid a choking hazard, keep the
battery and component away from a
child.
NOTICE
Dispose of the depleted battery
according to local laws or
regulations.
NOTICE
y
Make sure the positive side and
negative side of the battery are
y
installed correctly
y
Do not replace the battery with
wet hands to avoid rust.
y
Do not touch or move any
component of the remote control,
or it may affect proper operation.
y
Do not bend the electrode of the
battery insertion and that dust or
oils do not adhere to the case.
y
Close the lid of remote control
tightly.
!
使用手册小330.indd32 2011-4-1318:36:41