BYD F3DM - Page 42

- 42 -
F3DM Owner’s Manual
WARNING
y
Make sure the cap is installed
securely
to prevent fuel spillage in
the event of an accident.
y
Use only a genuine BYD fuel tank
cap for replacement. It is
designed
to regulate fuel tank pressure.
NOTICE
To prevent damage to the cap, apply
force only in the turning direction to
the cap. Do not pull or pry it.
3. The removed cap can be stored on
the back side of the fuel ller door.
Position the cap so that the hooks
point to the left and right, and set it in
the receptacle on the back side of the
door.
When installing the cap, turn the cap
clockwise until you hear a click. And
check whether the cap is tightened
securely Make sure the cap is
tightened securely. If the cap is not
tightened securely, the malfunction
indicator lamp will come on. The
indicator lamp will go off when driving. ,
Contact your Toyota dealer as soon as
possible if the indicator lamp does not
go out.
!
使用手册小330.indd42 2011-4-1318:36:42