Accessing the
Vehicle
Smart Key
Electronic smart key: Lock or unlock
all doors by pressing the driver's door
microswitch while carrying the electronic
smart key. Buttons on the key help you
lock or unlock doors, open the trunk, and
start the vehicle remotely.
① ‘Lock’ button
② ‘Unlock’ button
③ ‘Trunk Release’ button
④ ‘Start/Stop’ button
⑤ Indicator
⑥ Mechanical key
Taking out the mechanical key
When using the mechanical key in the
electronic smart key, slide the lock-up
button in the direction of arrow① and
push the back cover of the electronic
smart key in the direction of arrow②,
hook the head hole of the mechanical key
with the projection parts at both ends of
the back cover of smart key and pull it
in the direction of arrow③ to take out
the mechanical key, as shown in the right
gure.
After using the mechanical key, insert it
in the opposite direction as the arrow②
shows and close the back cover of the
smart key.
Accessing with the
Smart Key
Locking
• When all the doors, the hood and
the trunk lid are closed, press
the lock button to lock all the
doors. The hidden door handles fold
automatically. If the vehicle is shut
down, the side mirrors will fold (when
the Auto-Fold is enabled) with turn
signals ashing once. If the ignition has
not been switched o, the side mirrors
will not fold, the turn signals will not
ash, and the alarm will sound once.
Check whether all doors are securely
locked.
Unlocking
• Press the unlock button. All doors are
unlocked, the hidden door handles*
5
ACCESSING THE VEHICLE
To Next Page
Loading...
Need help?
General
