Need help?Do you have a question about the BYGD PVSC30A and is the answer not in the manual?
Displays system status including battery voltage, solar panel voltage, and load current.
Accesses system working days, battery counts, and overcurrent protection logs.
Navigates menus for accumulated power, voltage settings, and load modes.
Adjusts float voltage, low voltage disconnection, and recovery operating voltage.
Configures load working modes and sets discharge capacity limits.
Cuts off load output when battery voltage falls below a set threshold.
Disconnects load when battery voltage exceeds a safe upper limit.
Protects against overcurrent (short circuit/overload) and high input voltage.
General| Model | PVSC30A |
|---|---|
| System Voltage | 12V/24V Auto |
| Rated Charge Current | 30A |
| Operating Temperature | -35°C to +55°C |
| Storage Temperature | -40°C to +80°C |
| Cooling Method | Natural Cooling |
| Category | Controller |
| Max. PV Input Voltage | 100V |
| Max. PV Input Power | 390W (12V), 780W (24V) |
| Battery Type | Sealed, Gel, Flooded |
| Output Voltage | 12V/24V |
| Power | 390W (12V), 780W (24V) |
| Protection Features | Overcharge, Over-discharge, Overload, Short circuit, Reverse polarity, High temperature |
To Next Page
