38
English
14 Difference measurement and Pass/Fail
Now you can adjust the
corresponding value.
After the last number is activated,
the display jumps back to the
previous menu.
In this manner you can enter addi-
tional target and/or limit values for
the reference one after the other if
need be. After the entries are
complete, Difference measurement
is turned on with the new
reference.
Change reference
You can use this function to
change target values and limit
values of saved references. You
can also use it to define limit values
subsequently (for example for a
measured reference). Use the
scroll wheel to move the mark to
Change reference and press the
wheel.
All references are listed one after
the other in the following menu.
Select the desired reference and
press the scroll wheel.
In the next step you can define the
target and limit values as
described above.
To Next Page
Loading...
