C.L.BECKER HHPC 170/21 - Maintenance and Care Schedule

8 Maintenance and care
In this chapter you get informations about maintenance, which is necessary for a secure and effective
operation with the machine.
Service and maintenance should be performed only by trained personnel.
We expressly point out that you must complete all required checks, inspections and preventive
maintenance work conscientiously. Otherwise, we disclaim any liability or obligation. In cases of doubt,
please contact our customer service at your disposal.
The following table lists the various maintenance intervals
Activity Every day After 25
hours of
work
After 200
hours of
work
Once in
the year
As
needed
Sight control X
Check oil level X
Change oil X
(1.
change)
X
(all
following)
X
Regrease the quick
couplings
X X
Check the water filter
cartridge
X X
Control of spray guns and
high pressure hoses
X X X
Control valve operation X X
Control of the circulation
pressure
X X
Test according to BGR 500
Part 2, Chapter 2.36
X
Test according to
VDE 0701/0702
X
BA HHPC-170/21 60Hz englisch
Art.Nr. 02505004/60/BECKER/ENG
Stand 05/2013 Seite 14 von 23