5 Transport
5.1 Loading and transportation
The device has to be loaded only upright. Protect the high pressure cleaner against rolling, slipping
and falling upon the transport vehicle.
5.2 Unpack
Keep the device and the packaging material beyond the reach of children.
Dispose the packaging material according to environmental regulations to prevent
pollution of the environment
5.3 Location of installation
Check the proposed location carefully and reject the installation site, if there are safety
concerns.
The device only has to be mounted vertically based on a horizontal flat surface and
operated in such a position that it is absolutely safe and secured against rolling and
slipping.
The installation and operation of the high pressure cleaner might be restricted by local regulations.
5.4 Storing of the device
The pressure washer has to be stored in a dry, frost-free place. In case of frost-freeze
protection has to be carried out (as described in point 7 Decommissioning).
BA HHPC-170/21 60Hz englisch
Art.Nr. 02505004/60/BECKER/ENG
Stand 05/2013 Seite 9 von 23
To Next Page
Loading...