C-LOGIC 420-TC - Automatic Programs

11
Modo Explicación
Screen lock Press the power on/off key for 3 seconds and the screen lock will be enabled and
the lock icon will be displayed. Under this mode, the rotary key will be disenabled.
In order to return to the normal mode, press again the power on/off key for 3
seconds. The lock icon will disappear.
Automatic programs
The programmable thermostat offers 3 automatic programs: P1, P2 and P3. The program P1 is
congurable by the user and P2 and P3 are pre-set non-modiable programs.
After selecting the automatic mode, enter into setting screen, rotate the rotary key to choose one
program between P1, P2 and P3 and press the key to conrm the desired program.
Program P1:
P1 is a day-by-day weekly program with 6 different daily intervals. By default, the conguration is as
indicated below:
Day of the week Period Default interval Default temperature
7 days per week
1 0:00-6:00 15ºC
2 6:00-9:00 21ºC
3 9:00—12:00 15ºC
4 12:00—14:00 21ºC
5 14:00—17:30 15ºC
6 17:30—23:59 21ºC
In order to change this program, in the setting screen, rotate the rotary key to choose
PROG
TIME
ADVANCED
icon and
press the key to enter into automatic programming.
After selecting the day whose program you want to change, setting screen for that day will be displa-
yed. For each period, adjust the setting temperature and the end time of the interval and press the key
to conrm, jumping to the next period. When all the periods of the day were conrmed, it will return
to the setting menu.
It is needed to repeat this procedure for those days whose program you want to modify.
Program P2:
P2 is a pre-set program, with 2 different intervals for each day of the week. It is not possible to modify
intervals or temperatures. The setting is as indicated below:
Day of the week Period Interval Temperature
7 days per week
1 6:00-22:00 21ºC
2 22:00-6:00 17ºC