Coas
tal Amusements Inc. | Ring Toss
15
Cov
er the remainder of the bolt with the black acorn nut. Slide the bracket on the back of
the bonus sign over and onto the top of the pole (again, two persons recommended as the
sign is heavy). Secure the sign to the pole with two 3” ¼-20 Philips #3 screws (see below).
Plug the 4 pin Molex connector into the harness coming from the game. There is a J-
channel bracket to mount between the games at the rear. Use three ¼-20 bolts to go
through one game side, then the bracket, then the other game (see pictures below).
To Next Page
Loading...