79cab Produkttechnik GmbH & Co KG
M4
LPD
LPD is a network printing service. The service is available under Windows
NT4.0, Windows 2000 and Windows XP.
To use the printing service, the "LPD parameter must be set to "On".
SNMP
SNMP (Simple Network Management Protocol) is a query and command
language between managing stations on the one hand and managed units on
the other hand. For that purpose the managed unit (the printer) needs a
software module, the SNMP agent.
For SNMP communication between printer and managing station the parameter
"SNMP Agent" must be set to "On".
More information on possible SNMP messages of the printer can be found in
"Printer Web-Page / SNMP".
Timeserver
The Timeserver parameter makes it possible to connect with an Internet
Timeserver and synchronize Date and Time of the printer. To use, set the
"Timeserver parameter to "On" and input the IP Address for the Timeserver.
The synchronization takes place once an hour. The time received from the
Timeserver is not stored permanently in the printer. If the printer is powered
down, then restarted, the time displayed will be from the printer's internal clock
and not the timeserver. To more closely align the internal clock with the time
server, make the necessary changes to the Time parameter and click OK.
Ethernet error
When this option is disabled, error messages which result from the network
communication may be suppressed.
That way may be avoided, that e.g. a lost connection to a Timeserver can stop
a print job.
8. Printer Configuration
To Next Page
Loading...
