Need help?Do you have a question about the CAB M4 and is the answer not in the manual?
Introduces the M4 printer, its core features, and capabilities.
Details the various M4 printer models and their specifications.
Outlines essential guidelines for handling and maintaining the thermal printhead.
Provides safety instructions for the printer's lithium battery.
Presents detailed technical specifications for printer hardware components.
Information on supported linear and 2D barcode types.
Information on the types of media supported by the printer.
Technical specifications and diagram for label media dimensions.
Essential safety guidelines for operating the M4 printer.
Guides users on connecting the printer to the power source.
Details how to connect the printer to a computer via various interfaces.
Step-by-step instructions for installing printer drivers on Windows.
Detailed procedure for loading labels from a roll into the printer.
Step-by-step guide for loading the transfer ribbon for thermal transfer printing.
Guide to configuring the printer using the cab Setup Utility software.
Guide to configuring the printer using the CABLABEL software.
Instructions for configuring the printer via its web interface.
How to access and navigate the printer's web interface and status tab.
How to access and navigate the printer's web interface and status tab.
Procedure for updating the printer's firmware via FTP.
Provides detailed error messages, causes, and troubleshooting solutions.
Instructions for general cleaning of the printer exterior.
Procedure for cleaning the printer's print roller.
Detailed steps for cleaning the thermal printhead.
Step-by-step guide for replacing the printhead assembly.
Instructions for replacing the print roller and rewind assist roller.
Procedure for updating printer firmware using the RS-232 interface.
Procedure for updating printer firmware using the Ethernet interface.
To Next Page
General
