91cab Produkttechnik GmbH & Co KG
M4
"EAlert" Tab
When using the Ethernet Interface it is possible for printer to send error
messages by email to selected email addresses.
NOTICE !
For the use of this function, it is necessary to have an SMTP Server
configured. (See chapter "Printer Configuration").
The selection of what messages are transmitted and what email address they
are sent to are made using the "EAlert tab on the printer's web-page.
Fig. 10d Printer Web-Page - "EAlert" Tab
Before emails can be transmitted, a valid return address must be recognized
by the SMTP Server.
Click the down arrow on the Pull down menu in the lower half of the screen and
select "Return address" from the choices. Enter the return email address in
the "Email" box and click the "Set" button. The return address will appear in
the upper section of the screen.
Select the messages the same as above for the individual error condition and
the email address to send the message to. The selected email address will
appear in the upper window next to the selected error condition.
Modifying or deleting the selections is possible after clicking the desired line in
the upper half of the screen.
NOTICE !
You must enter the PIN number before changes will be accepted.
Emails are automatically sent when the error condition occurs.
10. Network Printer Functions
To Next Page
Loading...
