A-1cab Produkttechnik GmbH & Co KG
M4
Appendix A - Operation in Peel-off Mode
Components for the Peel-off Mode
The printer types M4/200P and M4/300P are specificly developed for operation
in the peel-off mode and they are equipped with dispense plate (7).
Additionally the optional Present Sensor PS8 (3) is needed.
In the peel-off mode the labels are removed from the silicon liner immediately
after printing, and then available in a dispense position (4) ready for further
processing. The see-through present sensor consisting of transmitter (1) and
receiver (2) indicates the presence of a label, and pauses the printing process
until the label is removed. After taking the label from the dispense position the
next label will be printed.
To guarantee a maximum of reliability in the peel-off mode the printer is
additionally equipped with a pair of rollers (5,6) to cause the dispense tension.
Fig. A-1 Components for Peel-off Mode
Appendix A - Operation in Peel-off Mode
1
2
3
4 5 6 7
To Next Page
Loading...
