CAB M4 - Security Settings

80 cab Produkttechnik GmbH & Co KG
M4
Parameter Meaning
PIN Set, erase, change a PIN number to
protect certain functions
Default : Off
Security
Setup
Security
Selection
Off
On
Change
PIN
With this menu it is possible to set, erase or change a four-digit code number
(PIN).
NOTICE !
If you want to change parameter settings via Ethernet interface using the
printers internal webpage, you have to activate a PIN in your printer !
After a parameter modification the correct PIN must be entered ! This
allows protection against unauthorized access to the settings.
The only exception, where no PIN is needed, is the first activation of the
PIN itself.
Table 8f Overview of the "Security" Folder
8. Printer Configuration