CAB M4 - Appendix E - Replacing Assembly Units; Printhead Replacement Procedure

E-1cab Produkttechnik GmbH & Co KG
M4
The printers are designed so the printhead replacement can be completed
without making any adjustments.
On M4 cannot be switched between printheads with 203 dpi and 300 dpi print
resolution.
CAUTION !
The printhead (1) is attached and aligned on a head plate (2). Do not
loosen the screws (3), that attach the printhead to the head plate.
Appendix E - Replacing Assembly Units
Replacing the Printhead
Fig. E-1 Printhead
For easy distinction between the printheads, a label (4) with information about
the printer type is located on the head plate.
Appendix E - Replacing Assembly Units
1 2 3 4
A3/M4 203dpi
A3/M4 300dpi