8 cab Produkttechnik GmbH & Co KG
M4
Printer Types
M4/200 : with 203dpi printhead
M4/200R : with 203dpi printhead and internal rewinder
M4/200P : with 203dpi printhead, internal rewinder and present sensor
M4/300 : with 300dpi printhead
M4/300R : with 300dpi printhead and internal rewinder
M4/300P : with 300dpi printhead, internal rewinder and present sensor
All printer types shown above are available as thermal transfer printers or as
direct thermal printers.
1. Product Description
General Information
M4 is an innovative printer which may be used in either direct thermal or
thermal transfer mode. It offers a high resolution with virtually an unlimited
variety of printout designs.
The center mounting plate is made of die-cast aluminum which makes it very
robust and resistant to bending.
By using 32 bit-processors from Motorola and the internal memory of 8 MB,
very long large labels (up to a length of 39 in / 1000 mm) can be printed
quickly.
As standard equipment, the printer has a serial RS-232-interface, an USB-
interface and an Ethernet-interface. Therefore the M4 can be used both as
local printer and in a network. The printer auto-senses which interface is
actually used.
The ranging power supply (100-240VAC) allows the printers to be used around
the world without re-configuration.
The modular design of the printers guarantees efficient service.
Additional accessories are external un- and rewinders as well as a label/tag
cutter.
1. Product Description
To Next Page
Loading...
