CAB M4 - Technical Specifications

11cab Produkttechnik GmbH & Co KG
M4
Technical Specifications
Printhead
Printhead Type : Direct thermal or thermal transfer
Printhead Model : Thick film transfer printhead
Printhead Resolution : M4/200 : 203 dpi = 8 dots / mm
M4/300 : 300 dpi = 11.8 dots / mm
Number of dots/line : M4/200 : 832
M4/300 : 1280
Print Speed : M4/200 : 2, 3, 4, 5, 6 ips (50, 75, 100, 125, 150 mm/s)
M4/300 : 2, 3, 4 ips (50, 75, 100 mm/s)
for peel-off mode : The print speed is limited to maximum 4 ips (100mm/s) as
standard
Print Width : M4/200 : up to 4.1 in (104 mm)
M4/300 : up to 4.25 in (108.4 mm)
Media
Material : Standard Labels and Cardboard / Tags
Direct Thermal, Thermal Transfer and various Synthetics
including: thermal transfer plaincoated papers, vinyl, Mylar,
metalized paper, non-woven fabric, fine woven fabric, thermal
visible light scannable paper, infrared scannable paper, thermal
ticket/tag stock, thermally sensitive plastic stock.
Media Type : die cut labels, continuous paper
Media Winding : face-in or face-out on the roll
Supply roll Diameter : up to 8.2 in (210 mm)
Core Diameter : 1.5 to 3 in (38.1-76 mm)
Material Thickness : 0.003-0.012 in (0,07-0,3 mm)
Weight : 60-300 g/sqm
Material Width : 4.7 in (120 mm)
Media Width : .5 to 4.6 in (12-116 mm)
for peel-off mode : 1 to 4.6 in (25-116 mm)
Media Height : .2 to 39 in (5-1000 mm)
for peel-off mode : .5 to 7.9 in (12-200 mm)
Internal Rewinder : to rewind media or the liner in peel-off mode
Core Diameter : 1.5 (38.1mm)
Rewind Diameter : up to 5.7 in (145 mm)
Label side : out
Transfer Ribbon
Inkside : in or out
Outer Diameter : up to 3.1 in (80 mm)
Core Diameter : 1 in (25 mm)
Length : up to 1650 in (500 m)
Width : up to 4.5 in (114 mm)
1. Product Description