Need help?Do you have a question about the CAB Hermes Series and is the answer not in the manual?
General| Display | LCD with backlight |
|---|---|
| Cutter | Optional |
| Dispenser | Optional |
| Print Technology | Thermal Transfer |
| Resolution | 203 dpi, 300 dpi, 600 dpi (depending on the model) |
| Interfaces | USB, Ethernet, Serial |
| Memory | 64 MB RAM, 128 MB Flash |
| Media Types | Labels, continuous media |
| Supported Barcode Types | Data Matrix, QR Code |
| Max Print Width | 4.09 inches (104 mm) |
Important safety and handling guidelines for the sensitive thermal printhead to prevent damage.
Specifies printer type, printhead technology, resolution (dpi), and print width.
Covers print speed, available font types, character sets, and adjustable character sizes.
Details supported graphic elements, file types, and barcode formats.
Guidance on selecting ribbons for printhead types and impact of quality on printhead life.
Specifies requirements for the ribbon trailer, including length and material properties.
Guidelines for safe electrical connections, moisture avoidance, and handling moving parts.
Instructions for setting the correct voltage and operating the power switch.
Guidance on replacing fuses according to the selected operating voltage.
Description of available serial and parallel interfaces for computer connectivity.
Important safety notice regarding grounding of computers and interface cables.
Details the printer's system test upon power-on and the 'ONLINE' status display.
Steps to check power, voltage, and fuses if the printer fails to start.
Step-by-step guide for loading label rolls onto the Hermes 4N/5N models.
Step-by-step guide for loading label rolls onto the Hermes 4F/5F models.
Important notes on photocell alignment and printhead care during label loading.
Instructions for loading transfer ribbon onto the Hermes 4N/5N models.
Instructions for loading transfer ribbon onto the Hermes 4F/5F models.
Crucial notice about the correct orientation of the inked side of the transfer ribbon.
Overview of the control panel with function keys, LEDs, and LCD display functions.
Procedure for entering the printer's setup mode for parameter configuration.
Explanation of function keys used for navigating and confirming settings in setup mode.
Details available setup parameters like Country, Interface, Printhead Position, and more.
Describes correctable errors, display messages, LED indicators, and function key actions.
Describes irrecoverable errors, display messages, and when to contact technical service.
To Next Page
