6 cab - Produkttechnik GmbH
A General Guide to the Documentation
Technical Information
The present manual contains beside the Technical Specification and the most
important instructions for the operator especially information for the integrators
of Hermes printers. This covers the built-in dimensions, the description of the
different interfaces and the pin assignments of the interface cables.
Note the directions for use on recommended material and the properties of the
thermal printhead in order to avoid damage and premature failure of your
Hermes .
Every effort has been made in the creation of this manual to provide as much
information as possible in an understandable manner.
We welcome your comments and suggestions regarding additions or
corrections to improve future editions of this manual. Please, let us know if you
have any questions.
Further Documentation
Complete information on the use of the Hermes printers are included in the
Operator's Manual.
The programming of the Hermes printers is completely compatible to the
programming of cab's Apollo. Therefore it is possible to use the information,
that can be found in the "Programming Instructions - Apollo".
Detailed information about service and maintenance are included in the
"Service Manual" of the Hermes. (e.g. replacement of components, adjustment
instructions, circuit diagrams, spare parts lists, etc.)
To Next Page
Loading...
Need help?
General
