CAB Hermes Series User Manual

10 cab - Produkttechnik GmbH
Overview of the Hermes Types
The present documentation contains the description of four different Hermes
types :
Part.-No. Description
5537500 Hermes 4N
5537501 Hermes 5N
5537503 Hermes 4F
5537506 Hermes 5F
The most important differences between Hermes types are :
- the type of the printhead
Hermes 4N/5N : Near edge printhead with 305 dpi
Hermes 4F/5F : Flat printhead with 300 dpi
- the maximum diameter of the label supply roll
Hermes 4N/4F : 7.9" / 200 mm
Hermes 5N/5F : 11.8" / 300 mm
Further the devices only will be called as Hermes, where are no differences
between the types.
Overwiew of the Optional Features
For the devices of the Hermes familiy the following optional features are
available.
Part.-No. Description
5537742 Warning Sensor Label End Hermes 4
5537743 Warning Sensor Ribbon End Hermes 4
5537744 Warning Sensor Label End Hermes 5
5537745 Warning Sensor Ribbon End Hermes 5
5537747 Warning Light
5537748 Feet Hermes 4/5
5942471 Bracket Hermes 4
5942472 Bracket Hermes 5
5533900 PC Keyboard Adapter
5560406 PC Card, 2 MB
5560405 PC Card, 4 MB

CAB Hermes Series Specifications

General

Display	LCD with backlight
Cutter	Optional
Dispenser	Optional
Print Technology	Thermal Transfer
Resolution	203 dpi, 300 dpi, 600 dpi (depending on the model)
Interfaces	USB, Ethernet, Serial
Memory	64 MB RAM, 128 MB Flash
Media Types	Labels, continuous media
Supported Barcode Types	Data Matrix, QR Code
Max Print Width	4.09 inches (104 mm)