Need help?Do you have a question about the CAB Hermes+ and is the answer not in the manual?
General| Power Supply | 100 - 240 V AC, 50/60 Hz |
|---|---|
| Print Technology | Thermal Transfer |
| Resolution | 203 dpi |
| Interfaces | USB, Ethernet |
| Display | LCD |
| Memory | 8 MB RAM |
| Supported Barcodes | 1D and 2D barcodes |
Explains the meaning of different information designation symbols used in the manual.
Defines the proper and improper uses of the device, emphasizing intended purpose and safety compliance.
Provides essential safety guidelines for operating the device, including voltage, environment, and handling of moving parts.
Illustrates and explains warning symbols on the device, emphasizing their importance and not removing them.
Details how to recycle obsolete devices and their components, including batteries.
Presents an illustrated overview of the Hermes+ printer components for models -2 and -3.
Continues the device overview with detailed diagrams of the Hermes+ -2S and its print mechanism.
Illustrates and lists the various connection ports on the back of the Hermes+ printer.
Guides the user through unpacking, inspecting for damage, checking contents, and setting up the printer.
Explains how to connect the printer to the power supply and to a computer or network.
Details the procedure for switching the printer on after all connections are made, including the system test.
Describes the user control of the printer via the control panel and its functions.
Explains various symbols that may appear on the printer's status line for quick status checks.
Details different printer states (Ready, Printing label, Pause, Errors, Power Save Mode) and their display indicators.
Outlines the functions of the navigator pad keys in different printer states (print mode, offline menu).
Provides step-by-step instructions with a diagram for loading label rolls onto the retainer for Hermes+ -2 and -3.
Details the process for loading label rolls on the retainer for Hermes+ -2S models.
Guides the user on how to thread the label strip through the print mechanism.
Explains how to adjust the label sensor for proper detection of label gaps or marks.
Describes the steps to guide the label liner to the internal rewinder for proper collection.
Details how to set the head locking system for optimal print quality and to prevent wear.
Provides step-by-step instructions for loading the transfer ribbon, including printhead cleaning.
Explains how to adjust the transfer ribbon feed path to prevent wrinkling and print errors.
Offers essential precautions for handling and protecting the printhead from damage.
Explains the process of synchronizing paper feed, especially for peel-off mode, to avoid wasting labels.
Describes the peel-off mode function, where labels are automatically peeled off after printing.
Explains the ribbon saving feature, which lifts the printhead to reduce ribbon consumption during idle periods.
Provides crucial safety warnings and general maintenance advice for the printer, especially the printhead.
Details the procedure for cleaning the print roller to ensure good media transport and print quality.
Outlines the recommended intervals and methods for cleaning the printhead for optimal performance.
Describes the three possible error states (Correctable, Irrecoverable, Critical) indicated by the printer's diagnostic system.
Provides a table listing common problems, their causes, and recommended solutions for the printer.
Lists various error messages, their likely causes, and the corresponding remedies or actions to take.
Continues the list of error messages, causes, and solutions, covering issues like SMTP, Timeserver, and USB devices.
Details the required dimensions for labels, including width, height, distance, and margins for different Hermes+ models.
Lists the physical dimensions and key distances within the printer relevant to label placement and printing.
Specifies the dimensions and requirements for reflex marks used for label detection.
Details the dimensions and placement requirements for cut-out marks used for label detection.
Declares that the Label Printer Hermes+ complies with EC directives on machinery and electromagnetic compatibility.
States the device's compliance with EC rules for safety and health and electromagnetic compatibility.
Provides a note on FCC rules regarding Class A digital devices and potential interference.
To Next Page
