29
9 Licences
9.1 EC Declaration of Incorporation
Gesellschaft für Computer-
und Automations-
Bausteine mbH & Co KG
Wilhelm-Schickard-Str. 14
D-76131 Karlsruhe,
Germany
EC Declaration of Incorporation
We declare herewith that the following „partly completed machinery“ as a result of design, construction and the version
put in circulation complies with the essential requirements of the Directive 2006/42/EC on machinery :
Annex I, Article 1.1.2, 1.1.3, 1.1.5, 1.1.6, 1.2.1, 1.2.4.1, 1.3.2, 1.5.1, 1.5.2, 1.5.8, 1.6.3, 1.7
The „partly completed machinery“ additionally complies with the Directive 2004/108/EC relating to electromagnetic
compatibility.
In the event of any alteration which has not been approved by us being made to any device as designated below, this
statement shall thereby be made invalid.
Device: Label Printer
Type: Hermes+
Applied EC Regulations: Applied Standards:
Directive 2006/42/EC on machinery
• EN ISO 12100:2010
• EN 60950-1 :2006+A11:2009
+A12:2011+A1:2010
• EN 61558-1:2005+A1:2009
Person authorised to compile the technical le : Erwin Fascher
Am Unterwege 18/20
99610 Sömmerda
Signed for, and on behalf of the Manufacturer :
cab Produkttechnik Sömmerda
Gesellschaft für Computer-
und Automationsbausteine mbH
99610 Sömmerda
Sömmerda, 12.04.2013
Erwin Fascher
Managing Director
The product must not be put into service until the nal machinery into which it is to be incorporated has been declared in
conformity with the provisions of the Directive on machinery
The documents according annex VII part B from the incomplete machinery are created and will commit to state agencies
on request in electronic kinds.
Declaration of Conformity according Directive 2004/108/EC relating to electromagnetic compatibility on the next page.
To Next Page
Loading...
Need help?
General
